AV-9B Sanitary Pressure Relief Bunging Valve with Tri-Clamp Ends, Manual Type

Sanitary Pressure Relief Bunging Valve with Tri-Clamp Ends, Manual Type Description:

A spring-loaded bunging valve is used to prevent tanks and vessels from being over-pressurized in the food, beverage, chemical & pharmaceutical industries. The valve body is made of stainless steel 304, with EPDM O-rings, and a polycarbonate cylinder air-lock housing. Glacier Tanks’ bunging valves come with an adjustable nut to set the release pressure, which is usually set higher than the operating pressure and will open when the pressure inside the tank/vessel exceeds this preset. Additionally, the manual release is possible by pulling the spindle via the spherical top knob. Cleaning of the valve may become necessary if expunged debris interferes with the valve from seating fully to form an airtight seal.

Sanitary Pressure Relief Bunging Valve with Tri-Clamp Ends, Manual Type Specifications:

Sanitary Pressure Relief Bunging Valve with Tri-Clamp Ends, Manual Type Applications:

Sanitary Pressure Relief Bunging Valve with Tri-Clamp Ends, Manual Type is used on process vessels to maintain a fixed pressure within the tank, with any excess gasses produced during the process to be safely vented.