Category: Sanitary Fitting
WHAT IS THE DIFFERENCE BETWEEN SANITARY FITTINGS AND FIXTURES?
Building construction has taken a new phase over the past decades. It has infused convenience and suitability for easy access to basic facilities and amenities that are essential in a building structure, especially, light and clean water. Buildings are now constructed with architectural designs, fixtures, and fittings to cater to hygiene, cleanliness, sanitation, safety, security, […]
Read moreSanitary Fittings Used in Environmental Protection
Stainless steel sanitary fittings are important materials used in industry, which are characterized by variety and ease of application. Stainless steel sanitary fittings are hollow long circular steels that are widely used in petroleum, chemical industry, medical treatment, food, light industry, mechanical instrument, and other industrial pipeline and mechanical structural parts. In addition, the stainless steel […]
Read moreTaps as Sanitary Fittings in Bathrooms
Water for baths, sinks, and basins can be provided by separate hot and cold faucets; this is common in older installations, especially in public toilets/washrooms and service rooms/laundries. In kitchens and bathrooms, mixers are commonly used. In this case, the hot and cold water from both valves is mixed before reaching the outlet, allowing the […]
Read moreWelding Measures of Sanitary Fittings
High-temperature crack The high-temperature cracks mentioned here refer to the cracks related to welding. High-temperature cracks can be roughly divided into solidification cracks, microcracks, HAZ (heat affected zone) cracks and reheating cracks. Low-temperature crack Low-temperature cracks sometimes occur in martensitic stainless steel and ferritic stainless steel with martensitic structure locally. Since the main causes are […]
Read moreSanitary Fittings in Coupling
A coupling is a device used to connect two shafts together at their ends for the purpose of transmitting power. Couplings do not normally allow disconnection of the shafts during operation, but there are torque limiting couplings that can slip or disconnect when the torque limit is exceeded. The main purpose of the couplings is […]
Read moreWhat Should be Done if the Sanitary Fittings Deform?
Sanitary fittings are the parts that connect pipes into pipes and are made of stainless steel, and they can be divided into welding type, clamping type, and thread type connection according to the connection method. Sanitary fittings are often used in pharmaceutical, food, and other industries where the sanitary grade is very high. Generally, those who […]
Read moreAttainment of Sanitary Fitting Solutions
The sanitary fittings installation is necessary for all places and all zones, but this is useful for the persons who carry out this procedure with the help of professional and qualified personnel. Sanitary fittings make social life easy and simple, as people can comfortably use water and gas. This situation is possible for people who […]
Read moreWhat You Should Know About Sanitary Fittings
Sanitary Fittings Introduction Sanitary fittings are mainly used for hygienic fittings used in places with high hygienic standards in pharmaceutical, food, and other industries. Generally, sanitary fittings are purchased from pharmaceutical or food factories for maintenance and related equipment configuration, and buyers are mainly pharmaceutical, food equipment system integrators and buying wholesale, and so on. Generally, […]
Read moreSanitary Fittings for Emergency Water Shortage
Water shortages are not common in most cities, but that does not mean they cannot happen. You could wake up one day and find dry faucets due to a lock to solve an underlying problem. However, before this happens, you will be warned to prepare for the interim period when the water will run out. […]
Read moreStainless Steel Sanitary Fittings Extend Valve Life
Sanitary fittings are used in places with high sanitary requirements and are widely used in the pharmaceutical industry. Generally, sanitary fittings show their advantages in high pressure, high strength, and mechanical structure materials, and they are a kind of steel tube that is resistant to air, steam, water, and other weakly corrosive media, as well […]
Read more
