2-Way Solenoid Valve Supplier

AV-2WSV 2-Way Solenoid Valve

Availability : In stock

Technical parameters:

Body Material	316L/304
Suitable Medium	Water, oil, gas, corrosive fluid, etc.
Medium temperature	-200 – +350℃
Medium viscosity	< 50C St(or customized)
protective performance	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Mode of connection	Terminal block type; lead type; plug type
Method of control	Normally open, normally closed
Power voltage	DC24~127V; AC36~380V
Connection	Flange, thread

2-Way Solenoid Valve Description

The two way solenoid valve is an automated basic component used to control fluids, usually connected to other valves. The 2-Way solenoid valve has one inlet port and one outlet port. When the valve is de-energized, the valve seal on the seat to shut off the gas or flow makes the valve keep closed. When the coil is energized, the core seal is pulled into the solenoid coil, and then the valve opens. The principle of a normally open solenoid valve is the same, but the valve seal keeps open.

2-Way Solenoid Valve Applications

– Press Room & Metal Stamping
– Heating equipment
– Automotive
– Analytical & Diagnostic Equipment

2-Way Solenoid Valve Technical Parameters

Body Material	316L/304
Suitable Medium	Water, oil, gas, corrosive fluid, etc.
Medium temperature	-200 – +350℃
Medium viscosity	< 50C St(or customized)
protective performance	Waterproof, explosion-proof (Exd IICT5), anti-corrosion
Mode of connection	Terminal block type; lead type; plug type
Method of control	Normally open, normally closed
Power voltage	DC24~127V; AC36~380V
Connection	Flange, thread