AV-18AVH Sanitary Centrifugal Pumps

Sanitary Centrifugal Pumps Application

The AVH Series centrifugal pump is your solution to a lower cost of ownership while providing the flexibility your operations need. Its stainless steel construction provides the durability, integrity, and absolute quality required for your sanitary fluid transfer operations. AVH is available in 9 sizes: AVH-5, AVH-10, AVH-15, ANH-20, AVH-25, AVH-30, AVH-35, AVH-40, and AVH-45.

Sanitary Centrifugal Pumps Standard Design:

Centrifugal pumps primarily consist of a stationary pump casing and an impeller mounted on a rotating shaft. The pump casing provides a pressure boundary for the pump and contains channels to properly direct the suction and discharge flow. The pump casing has suction and discharge ports for the main flow path of the pump and normally has small drain and vent fittings to remove gases trapped in the pump casing or to drain the pump casing for maintenance.
The series meets the most stringent sanitary standards for being CIP-able and SIP-able.

Shaft Seals of Sanitary Centrifugal Pumps

The AVH pump is equipped with either an external single shaft seal or a flushed shaft seal. The stationary seal rings are made up of acid resistant steel AISI 316L and silicon-carbide. The rotary seal rings are in graphite. The pump also can be equipped with a double mechanical shaft seal.

Three Kinds Of Mechanical Seals Are Available:

Single Mechanical Seal            Single Mechanical Seal                   Double Mechanical Seal

Sanitary Centrifugal Pumps Technical Parameter:

• Maximum flow: 150 m³/h
• Maximum discharge head: 70m
• Maximum revolution: 3600 rpm
• Temperature range: -4 ° F to 248 ° F (-20 ° C to 120 ° C)
• Noise level (at 1m): 60-85 dB (A)

Sanitary Centrifugal Pumps Design Features:

• Stainless steel construction
• Adjustable stainless steel legs
• Designed according to 3A sanitary standard
• IEC B34 motors, IP55, F-class insulation, 50Hz or 60Hz.

Sanitary Centrifugal Pumps Materials:

• Product wetted–SS 304/316
• Gaskets: EPDM
• Mechanical seal: SIC/SIC/EPDM
• Inside surface treatment: Ra 32µin
• Outside surface treatment: Sandblasted or mirror surface

Sanitary Centrifugal Pumps Options

• Mechanical seal: C/SIC, TC/TC
• Gasket: FPM (Viton), NBR
• End connection: Tri-clamp, threaded, flange, DIN, SMS, RJT, IDF

Ordering-Please State The Following When Ordering:

• Pump type
• Voltage and frequency
• Connections
• Flow rate, pressure and temperature
• Density and viscosity of product
• Options

Flow Chart

Frequency: 50 Hz
Revolution: 3000 rpm