AV-10 Sanitary Tank Bottom Valves

Availability : In stock

Materials
Product wetted steel parts: AISI 316L/304
Other steel parts: AISI 304

FDA Seal: EPDM
Optional: PTFE, all seals complying with FDA 21CFR177.2600.

Technical Specification:

Max. working pressure: 147psi (10bar)
Control air pressure: 70-116 (5-8bar)
Working temperature range: EPDM: 14° F to 248° F (-10° C to 120° C)
Sterilization temperature: 302° F ( 150° C, MAX 20 min)
Pneumatic connection: G1/8″ (BSP)
Finish: <32Ra (<0.8 µm) Other finishes available upon request

Reference Price:

Sanitary Tank Bottom Valves Application

AV-10 sanitary tank bottom valve is used extensively in the tanks and vessels for pharmaceutical, biological, and food industries. This series includes tank bottom diaphragm valves, tank bottom seat valves, elbow-type tank bottom valves, etc..

Sanitary Tank Bottom Valves Materials

Product wetted steel parts: AISI 316L/304
Other steel parts: AISI 304

FDA Seal: EPDM
Optional: PTFE, all seals complying with FDA 21CFR177.2600.

Sanitary Tank Bottom Valves Design Standard:

Tightly structured, the valve can be installed in a small space.
Discharge materials without blind angle and residual leakage.
Various standards: DIN, ISO/IDF, BS/RJT, etc.
End connections: Sanitary Clamp, Flanged, or others upon request.
Both manual and pneumatic operations available as customers require.
Pneumatic head with or without C-top and position sensor.

Sanitary Tank Bottom Valves Technical Specification:

Max. working pressure: 147psi (10bar)
Control air pressure: 70-116 (5-8bar)
Working temperature range: EPDM: 14° F to 248° F (-10° C to 120° C)
Sterilization temperature: 302° F ( 150° C, MAX 20 min)
Pneumatic connection: G1/8″ (BSP)
Finish: <32Ra (<0.8 µm) Other finishes available upon request

Technical Parameter
Steel Material	Product wetted steel parts	AISI 316L	Provided with material inspection report
	Other steel parts	AISI 304
Seal Material	Standard	EPDM	All seal materials comply with FDA 21CFR117.2600
	Option	FPM, Silicone, NBR
Pressure	Working Pressure	0-147psi (0-10bar)
	Supply pressure for air actuator	Min.- Max.: 5~8bar (70-116 PSI)
Temperature	Working temperature	EPDM : 14° F to 248 ° F (-10° C to 120° C )
Surface Treatment	Inside surface treatment	Ra 16-32 µ in (0.4-0.8 µm)
	Outside surface treatment	Sand blast or mirror
Connection	End connections: Sanitary Clamp, Flanged, or others upon request
Pneumatic head	Normally closed (NC)-Air to open and spring to close; Normally open (NO)-Air to close and spring to open; Air to Air (AA)-Air to open, air to close.