AV-7PA Pneumatic Type Aseptic Sampling Valves

Availability : In stock

Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for valve with micro type connector)

Technical Specification
Nominal Pressure:
Max. product pressure: 87psi (6bar)
Temperature:
Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry, because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.

Pneumatic Type Aseptic Sampling Valves Application

AV-7PA series is a stainless steel aseptic sampling valve with a pneumatic actuator; it is wildly used in the food, dairy, brewery, winery, and many other hygienic industries.

Pneumatic Type Aseptic Sampling Valves Materials

Materials: AISI-316L
Size: DN8
Diaphragm: Silicone (for standard valve), EPDM (for a valve with micro type connector)

Pneumatic Type Aseptic Sampling Valves Standard Design

A pneumatic aseptic sampling valve is made from four parts: valve body, valve head, a pneumatic actuator, and one piece of the diaphragm. A rubber diaphragm valve is put at the axis of the valve head, acting as an extensible valve core.

End connections can be welded, clamped, or threaded, only one size DN8 available.
Valve open: sampling valve close: sterilization

Open Close

Technical Specification

Nominal Pressure:
Max. product pressure: 87psi (6bar)
Temperature:
Max. sterilization temperature: 130°C, dry steam: 121°C (2bar).
Steam must be dry because condensed water will damage the diaphragm. The diaphragm should be replaced after 100 times samplings or sterilizations.