Multi-channel Bottom Diaphragm Valve is used extensively in tanks and vessels for the pharmaceutical, biological, and food industries. This series includes tank bottom diaphragm valves, tank bottom seat valves, elbow-type tank bottom valves, etc.

Multi-channel Bottom Diaphragm Valve Specifications

Multi-channel bottom diaphragm valve MG-32B

• 2 control valves, 3 ports
• A water point valve seat
• Dead zone = ≤ 1D
• Size: 1″-2″, DN25-DN50
• Material: 316L/1.4404, 1.4435 NB2 Fe＜5%
• Inner Surface Treatment: Ra0.4μm, Mechanical polishing, Electro polishing
• Diaphragm: Double diaphragm: EPDM+PTFE; Single diaphragm: EPDM, FPM, Silicon
• Operations: Manual/Pneumatic
• Control: configurable, 1) Control Unit C-TOP, 2) positioner IL-TOP, 3) mechanical valve regulator, 4) Position Sensor

Related products: AV-5MS Sanitary Manual Shutoff And Divert Valves, AV-5SS SANITARY SHUTOFF AND DIVERT VALVES, AV-2MFC3 SANITARY STAINLESS STEEL 3-WAY BALL VALVE WITH TRI-CLAMP ENDS, MANUAL TYPE, AV-10PT Powder Tank Bottom Butterfly Valve

The post AV-10MCB Multi-channel Bottom Diaphragm Valve appeared first on Adamant Valves.

Stainless Steel Tank Bottom Valve is made from hygienic stainless steel and is suited for vessel and tank bottoms. We offer manual and pneumatic type tank bottom valves, specifically used in dairy, food processing, beverage, pharmaceutical, and fine chemical industries. A complete discharge system avoids retention. Comply with US 3-A, FDA standard.

Stainless Steel Tank Bottom Valves have been designed for trouble-free and efficient tank drainage.

Tank Bottom Valve Specifications

Tank Bottom Valve Applications

Specifically used in dairy, food processing, beverage, pharmaceutical, and fine chemical industries.

Related products: AV-4MC Sanitary Diaphragm Valves With Tri-Clamp Ends, Manual Type, Plastic Handwheel, AV-10BM Sanitary Tank Bottom Diaphragm Valve, Manual Type, AV-4MTBR Sanitary Tank Bottom Radial Diaphragm Valve

The post AV-10TB Tank Bottom Valve appeared first on Adamant Valves.

The concept of this double seat valve is characterized by its excellent flexibility and easy operation. The liquid in the tank can drain completely, thus avowing the residues. Clamp connection of tank bottom and flange gives a high flexibility.

Specifications of Sanitary Pneumatic 2-way Double Seat Mix Proof Valve

	SIZE	A	B	C	D	t	E	Q	L	M
	1.5″	460	160	161	38.1	1.5/1.65	130	120	216	12.7
	2″	460	160	161	50.8	1.5/1.65	130	120	216	12.7
	2.5″	505	198	180	63.5	2/1.65	150	133	226	12.7
	3″	526	198	193	76.2	2/1.65	150	133	226	12.7
	4″	600	254	230	101.6	2	195	168	246	15.8

Options of Sanitary Pneumatic 2-way Double Seat Mix Proof Valve

• NC operated: normally closed (fail closed)—air to open, spring to close
• NO operated: normally open (fail open)—air to close, spring to open
• AA operated: double acting—air to open, air to close

• Valve intelligent control: position sensor, C-top controller, C-top controller (AS-I)
• Standards: DIN, SMS, ISO / IDF, BS / RJT, and ASME / BPE

Applications of Sanitary Pneumatic 2-way Double Seat Mix Proof Valve

Sanitary double-seat mix-proof valve has been designed to allow safe separation of non-compatible products (such as milk or milk products & cleaning solutions).

The post AV-10PD Sanitary Pneumatic 2-way Double Seat Mix Proof Valve with Welded End appeared first on Adamant Valves.

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304
FDA Seal: PTFE, all seals complying with FDA 21CFR177.2600.

Sanitary Pneumatic Tank Bottom Ball Valve Design Features:

· Easy to operate.
· Low fluid resistance.
· Lightweight and small volume.
· Body style: three-piece
· Various standards: DIN, ISO/IDF, BS/RJT, etc.
· End connections: Sanitary Clamp, Flanged, or others upon request.
· Both manual and pneumatic operations available as customers require.
· Pneumatic head with or without C-top and position sensor.

Sanitary Pneumatic Tank Bottom Ball Valve Specification:

Sanitary Pneumatic Tank Bottom Ball Valve Options:

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

• NC operated: normally closed (fail closed)—air to open, spring to close
• NO operated: normally open (fail open)—air to close, spring to open
• AA operated: double acting—air to open, air to close

Application of Sanitary Pneumatic Tank Bottom Ball Valve

Sanitary pneumatic tank bottom ball valves are wildly used in the industries with high hygiene requirements such as food, beverages, dairy products, biopharmaceuticals, etc.

The post AV-10PB Sanitary Tank Bottom Ball Valve With Tri-Clamp Ends, Pneumatic Type appeared first on Adamant Valves.

Product wetted steel parts: AISI 316L

Other steel parts: AISI 304

FDA Seal: PTFE, all seals complying with FDA 21CFR177.2600.

Sanitary Manual Tank Bottom Ball Valve Design Features:

• Easy to operate.
• Low fluid resistance.
• Lightweight and small volume.
• Body style: three-piece
• Various standards: DIN, ISO/IDF, BS/RJT, etc.
• End connections: Sanitary Clamp, Flanged, or others upon request.
• Both manual and pneumatic operations available as customers require.
• Pneumatic head with or without C-top and position sensor.

Sanitary Manual Tank Bottom Ball Valve Specification:

Sanitary Manual Tank Bottom Ball Valve Options:

Actuators to reach automatic operation: pneumatic stainless steel actuator (vertical type), pneumatic aluminum actuator (horizontal type), and electric actuator.

• NC operated: normally closed (fail closed)—air to open, spring to close
• NO operated: normally open (fail open)—air to close, spring to open
• AA operated: double-acting—air to open, air to close

Sanitary Manual Tank Bottom Ball Valve Application:

Sanitary pneumatic tank bottom ball valves are widely used in the industries with high hygiene requirements such as food, beverages, dairy products, biopharmaceuticals, etc.

The post AV-10MB Sanitary Tank Bottom Ball Valve With Tri-Clamp Ends, Manual Type appeared first on Adamant Valves.

AV-10BP sanitary tank bottom valve is used extensively in the tanks and vessels for pharmaceutical, biological, and food industries. This series includes tank bottom diaphragm valves, tank bottom seat valves, elbow-type tank bottom valves, etc.

Sanitary Tank Bottom Diaphragm Valve Materials

Product wetted steel parts: AISI 316L
Other steel parts: AISI 304

FDA Seal: EPDM+PTFE
Optional: EPDM/Silicone/FPM(Viton), all seals complying with FDA 21CFR177.2600.

Sanitary Tank Bottom Diaphragm Valve Design Standard:

•          Tightly structured, the valve can be installed in a small space.
•          Discharge materials without blind angle and residual leakage.
•          Various standards: DIN, ISO/IDF, BS/RJT, etc.
•          End connections: Sanitary Clamp, Flanged, or others upon request.
•          Both manual and pneumatic operations available as customers require.
•          Pneumatic head with or without C-top and position sensor.

Sanitary Tank Bottom Diaphragm Valve Technical Specification:

•          Size:1”-4” DN25-DN100
•          Max. pressure: 116psi (8bar)
•          Control air pressure: 70-116 (5-8bar)
•          Highest temperature range: Stainless steel actuator: -12° F to 302° F (-20°C to 150°C)
•                                   Plastic  actuator: -12° F to 266° F (-20°C to 130°C)
•          Sterilization temperature: 302° F ( 150° C, MAX 20 min)
•          Pneumatic connection: G1/8″ (BSP)
•          Finish: <32Ra (<0.8 µm) Other finishes available upon request

The post AV-10BP Sanitary Tank Bottom Diaphragm Valve appeared first on Adamant Valves.

AV-10 sanitary tank bottom valve is used extensively in the tanks and vessels for pharmaceutical, biological, and food industries. This series includes tank bottom diaphragm valves, tank bottom seat valves, elbow-type tank bottom valves, etc..

Sanitary Tank Bottom Valves Materials

Product wetted steel parts: AISI 316L/304
Other steel parts: AISI 304

FDA Seal: EPDM
Optional: PTFE, all seals complying with FDA 21CFR177.2600.

Sanitary Tank Bottom Valves Design Standard:

• Tightly structured, the valve can be installed in a small space.
• Discharge materials without blind angle and residual leakage.
• Various standards: DIN, ISO/IDF, BS/RJT, etc.
• End connections: Sanitary Clamp, Flanged, or others upon request.
• Both manual and pneumatic operations available as customers require.
• Pneumatic head with or without C-top and position sensor.

Sanitary Tank Bottom Valves Technical Specification:

• Max. working pressure: 147psi (10bar)
• Control air pressure: 70-116 (5-8bar)
• Working temperature range: EPDM: 14° F to 248° F (-10° C to 120° C)
• Sterilization temperature: 302° F ( 150° C, MAX 20 min)
• Pneumatic connection: G1/8″ (BSP)
• Finish: <32Ra (<0.8 µm) Other finishes available upon request

The post AV-10 Sanitary Tank Bottom Valves appeared first on Adamant Valves.